ADC Board FAQ


  1. ADC Board FAQ
    1. Links
    2. Frequently Asked Questions
      1. What should be the power at signal and clock inputs on the ADC boards ?
      2. What analog signal ports should be connected on the ADC board ?


Links

Other useful FAQs:

Frequently Asked Questions


What should be the power at signal and clock inputs on the ADC boards ?

The power should be 0 dBm.


What analog signal ports should be connected on the ADC board ?

The I+, Q+ and clk_i inputs must be fed the two analog channels and clock respectively at 0dbm. The sync input must be fed by a 0 to 2.5V logic signal.


AdcFaq (last edited 2006-06-02 16:44:55 by aparsons)